HEPA filter is a kind of industrial supplies, we have to ensure clean indoor effect, every once in a while we'll replace the filter, and now most of the devices are installed in the ceiling, so more conducive to the air filter, This will undoubtedly bring a difficulty to install.
    We must be confirmed before the installation of high efficiency air filter unit is no problem, then we will bring you the next few notes on the installation, these are all usually have to pay attention to. For example, the need to install air conditioning in the air supply system to stop the work, as well as the inside of the seal must be tight, and it is a better filtering effect.
    Then the HEPA filter installation method is how it, we have to lower specific description. During transport, we have to pay attention to signs of direction following the manufacturer to place, gently, so that you can better placement collision, so as to avoid artificial damage. Before installing the best for your cleanroom thorough cleaning, clean out all the dust, and then began preparations to install filters. Even the technical dissection and the ceiling on the ceiling also need to be cleaned. As well as in cleanroom reached after cleaning requirements, we must let the air conditioner run for a while, then clean out the dust again, and then install the filter. For checking step before its installation is not described in detail, for example, check the packaging, filter paper and sealants, as well as product certification is true, whether the words Inspection.
    Then we talk about the matter HEPA filters should be noted at the time of installation, the first of its frame should be placed fairly flat, this is a must requirement, does not allow deviation between it and the frame secondly we will use sealants to seal, so that would not have affected the air filter, and we glue time to pay attention, be sure to maintain the smooth flow pipeline can not be completely blocked. Currently the most efficient air filters are to be installed with a seal method, sealed material selection is sponge rubber sheet, if necessary, will be marked with glass, plastic, wait until the glue is completely dry, we run the purification system to see whether there is anything unusual installation, there is something wrong, then immediately corrected.