Company News
Active carbon filter element
Category:Company NewsReleased Date:2015-10-12

Active carbon filter element is made of active carbon particles by adding a binder to heat and sintering. The inner layer of the filter element is the polypropylene frame, which is used to enhance the strength of the filter element. The frame is covered with two layers of polypropylene fiber, which can block the liquid through the carbon core and carry out more than 10 micron particles. Carbon core coated with two layers of polypropylene ultrafine fiber felt, liquid stopped more than 10-20 micron particles, so filter with filtering and purifying the dual function. The outermost layer is a white plastic mesh, so that the filter element has a complete appearance and the whole clean appearance. The filter are arranged on both ends of nitrile rubber soft cover, the filter into the filter cylinder after a good seal. Refined active carbon filters are sealed with plastic film, to prevent pollution and to keep the filter element is often in a clean state.

Activated carbon filter has good adsorption, can effectively remove the odor of chlorine in the water, color, and organic matter etc..

Second stage filtration: granular activated carbon filter.


Back
Keywords:
版权所有 2015.昆山顺峰净化设备科技有限公司. Technical support:优网科技 Sitemap
收缩
  • QQ咨询

  • 联系我们